Product Info

Detailed Product Information

To find more information on the products and materials offered by Castable Ceramics, click the associated tabs listed below. For your convenience, we list the benefits, indications, prep guides, technical notes, cementation instructions, and ADA codes for each.

Full-Contour Zirconia

For crowns and bridges up to 12 units
Ideal product for replacement of full gold crowns and PFMs

Flexural strength – 1,100 MPa
Compressive Strength – 3,000 MPa
Conventional cementation
Conventional tooth preparation

RelyX™ Ultimate Adhesive Resin Cement with
Scotchbond™ Universal Adhesive
RelyX™ Unicem 2 Self-Adhesive Resin Cement

D2740 Crown – Porcelain/Ceramic Substrate
D6245 Pontic Porcelain/Ceramic
D6740 Abutment Crown Porcelain/Ceramic

IPS e.max

Highly esthetic one-piece restorations
Indicated for single-unit posterior restorations
Chamfer or shoulder preparation
Cementable or bondable

Veneers
partial crowns
anterior and posterior crowns
3-unit anterior bridges
3-unit premolar bridges

3-unit posterior bridges
4-6 unit anterior bridges
4-6 unit posterior bridges
inlay-retained bridges
posterior molars

Shoulder or heavy chamfer margin
1.5-2.0 mm occlusal reduction
1.5 mm axial reduction
1.0 mm reduction at gingival margin

Bond or conventional cementation

D2740 Crown
D2610 Inlay for 1 surface
D2620 Inlay for 2 surfaces
D2630 Inlay for 3 surfaces
D2962 Labial Veneer
D2783 Crown 3/4 Porcelain Ceramic (does not include veneers)

PFZ

Superior strength
High Biocompatability
Preparation
Feather-edge margin

Conventional Cementation

Crowns, bridges, inlays and onlays

Partials, implants, any restoration where esthetics are crucial

D2790 Crown Full-Cast Hi-Noble Metal
D2791 Crown Full-Cast Predominantly Base Metal
D2792 Crown Full-Cast Noble Metal

PFM

Use for crowns and bridges up to fourteen units
Can be manufactured to non-precious, semi-precious, and yellow high noble copings
Used in conjunction with cast partials and implants

Ideal preparation for PFMs is a chamfer margin
If a porcelain labial margin is prescribed, then a shoulder margin preparation is required
Feather-edge margin preparations are indicated for full-cast restorations

Panavia 21 – tin plated
Glass ionomer cement (GC Fuji, GC America)
Zinc Phosphate Polycarboxylate
Resin Ionomer cement (RelyX, 3M ESPE)

If an adjustment is required on the ceramic, use a fine diamond with water and air to keep the crown cool.
To contour the ceramic, polish with a pink rubber wheel and diamond polishing paste (Brasseler, Shofu, Vident).

D2750 Crown Porcelain fused to high noble
D2751 Crown Porcelain fused to non-precious
D2752 Crown Porcelain fused to semi-precious
D6750 Crown Porcelain fused to high noble (bridge units)
D6751 Crown Porcelain fused to non-precious (bridge units)
D6752 Crown Porcelain fused to semi-precious (bridge units).

Full Cast Crown

Anterior & bicuspid crowns
Anterior & bicuspid bridges (up to 6 units)
Posterior crowns & bridges (up to 6 units)
Can be seated over implant abutments

Bridges which include molars
Maryland style bridges
Bridges with a short vertical height without adequate connector height

Can be cemented using a resin reinforced glass ionimer such as Relyx Luting cement. Or bonded using a resin cement, when extra strength is needed due to lack of retention on the prep, use a resin cement such as Relyx Unicem or Relyx Ultimate.

D2740 Crown
D2610 Inlay for 1 surface
D2620 Inlay for 2 surfaces
D2630 Inlay for 3 surfaces
D2962 Labial Veneer
D2783 Crown 3/4 Porcelain Ceramic (does not include veneers)

Castable Ceramics

4111 Minnesota Drive Suite 200
Anchorage, Alaska 99503

907.258.0165

907.272.6526

Office Hours

Monday 8 am to 5 pm

Tuesday 8 am to 5 pm

Wednesday 8 am to 5 pm

Thursday 8 am to 5 pm

Friday 8 am to 5 pm

Connect With Us

×